Catalog

Characteristics: The product can quickly get dry and form a metal mirror with extreme strong decoration effect. Additionally, it can effectively resist UV radiation, increase the anti-aging performance, and prevent the metal surface from rusting. Since it easily gets damaged in its appearance, it is not suitable to be used in parts where frequent friction and collision occur. With fine covering power, the product needs no matching primer. Availability: It is applicable for the base material of metal, glass, plastics, glabrous wood and ceramic and etc. Usage: Clean the surface of the sprayed article to prevent dust, dirt, grease and etc. Shake the pot hard for 30 seconds until the lacquer is mixed well, and spray the article evenly from 15-20cm away. The optimal effect can be achieved when the product does not flow down. It is suggested not to use the lacquer as covering coating. Otherwise, the mirror effect will be destroyed. Do not use the lacquer under the environment where much adhesion is needed. Spray it in rainy days or under severe environment as seldom as possible. Since it easily gets damaged in its appearance. It is not suitable to be used in parts where frequent friction and collision occur.

This product belong to high efficient peel off aerosol paint remover, It has many advantages, such as easy to operate, high efficient to remove paint, no corrosion to the metal. Mainly used in the removing of air dry alkyd resin varnish, basecoat baking enamel, and nitro-lacquer acrylic paint. Also used in peeling of some of low temperature curing two component epoxy with barrier paint. Widely used in peeling off the paint surface of car, motorcycle, machine, equipment, meter etc. USAGE DIRECTION: Preparing a rag before you apply it. And you'd better to apply the remover in a well-ventilated area. Shaking the aerosol can up and down several times softly to blend the liquid well-proportioned, and take away the cap to apply. Aim the nozzle at the stuff which you want to remove the paint, press the nozzle, meanwhile, move the can slowly to ensure the area you want to covered be sprayed. After spraying, waiting for several seconds and then wipe the liquid with the rag. If you are not satisfied with some segment, you can spray at that segment again like before and wipe again.

FEATURE: This product is aerosol paint which can be natural dried under normal temperature. It has features of easy for operation, good atomizer and high rate when spraying. Its paint film can be dried in 30 minutes under normal temperature, It can still m aintain its good performance even long time under temperature of 500℃. USAGE DIRECTION: It will be better to ensure the stuff surface is clean, dry and oilless before apply the spray paint, if not, it will have an influence on the final effect. And you'd better to apply the paint in a well-ventilated area and take gloves, glasses, respirator. Shaking the aerosol paint up and down several times softly to blend the paint well-proportioned, and take away the cap to apply. Aim the nozzle at the stuff which you want to change its color, keep 15cm distance between the nozzle and the stuff and press the nozzle softly, meanwhile, move the can slowly to ensure the paint is sprayed well-distributed. After applying, don't touch the surface before it dry. If you are not satisfied with some segment, you can spray at that segment again like before. Then wait it dry. CAUTION: Spray upright at an angle of no less than 45 degree between can body and horizon . Prolonged exposure to sunlight or heat may cause bursting. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 ℉ . Keep away sources of ignition. Avoid contact with eyes. FIRST AID: For eye contact, flush thoroughly with water for 15 minutes. KEEP AWAY FROM CHILDREN AND ANIMALS.

Characteristics: The product can quickly get dry and form a metal mirror with extreme strong decoration effect. A dditionally, it can effectively resist UV radiation, increase the anti-aging performance, and prevent the metal surface from rusting. S ince it easily gets damaged in its appearance , it is not suitable to be used in parts where frequent friction and collision occur. W ith fine covering power, the product needs no matching primer. Availability: It is applicable for the base material of metal, glass, plastics, glabrous wood and ceramic and etc. Usage: Clean the surface of the sprayed article to prevent dust, dirt, grease and etc. Shake the pot hard for 30 seconds until the lacquer is mixed well, and spray the article evenly from 15-20cm away. T he optimal effect can be achieved when the product does not flow down. I t is suggested not to use the lacquer as covering coating. O therwise, the mirror effect will be destroyed. D o not use the lacquer under the environment where much adhesion is needed. S pray it in rainy days or under severe environment as seldom as possible. S ince it easily gets damaged in its appearance. I t is not suitable to be used in parts where frequent friction and collision occur. CAUTION: Spray upright at an angle of no less than 45 degree between can body and horizon . Prolonged exposure to sunlight or heat may cause bursting. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120℉. Keep away sources of ignition. Avoid contact with eyes. FIRST AID: For eye contact, flush thoroughly with water for 15 minutes. KEEP AWAY FROM CHILDREN AND ANIMALS.