Catalog

Würth

ADD-DIESEL-(CETAN BOOSTER)-300ML

Würth

ADD-DIESEL-ADDITIVE-WINTER-DIESEL-1000ML

Würth

ADD-DIESEL-ADDITIVE-WINTER-DIESEL-150ML

Würth

ADD-DISL-ADBLUE-10LTR

Würth

ADD-DISL-ADD-WINTER-DISL-300ML

Würth

ADD-DISL-TREATMENT-AR-300ML

Würth

ADD-ENGCLNR-INTERI-OIL-SMOKE-STOP-300ML

Würth

For cleaning all petrol and diesel engines Cleans the inside of the engine and the oil supply system Engines cleaned of dirt can now operate at their full performance level together with the clean oil. Quick and gentle cleaning processDoes not attack sealsOptimise exhaust gas emissionsCompatible with catalytic convertersLoosens jammed piston ringsEasy to useA 400 ml can is sufficient for up to 5 litres of engine oil. 1000 ml is sufficient for 10–15 litres of oil Notice Not suitable for use in motorcycles with oil bath clutch that share a joint oil circuit Application area Suitable for all mineral and synthetic-based engine oilsSuitable for all petrol and diesel engines Instructions Add the engine flush and cleaner to the oil when the engine is at operating temperature. Let the engine idle for approximately 10 minutes. Then change the oil and the filter.

Würth

ADD-ENGCLNR-OIL-LEAK-STOP-300ML

Würth

Protection for all petrol and diesel enginesApplication areaAdd the contents of the can to the engine oil each time the engine is repaired, or the oil is changed. In addition, the engine oil performance improver can be added when diagnosing engine oil. Instructions300 ml are sufficient for 4.5 litres of engine oil. 1. 000 ml are sufficient for 10 litres of engine oil.Extends the service life of the engine Protects against valves burning outLoosens deposits on resin-coated piston ringsRemoves oil sludge and unblocks clogged oil ductsNeutralises aggressive combustion acidsSupplements used up engine oil ingredients Minimises friction resistanceSuitable for oil diluted with biofuelsCorresponds to latest API engine oil standards

Würth

AY-SPRAYPIPE-SYSCLNR-VEH

Würth

Special, highly active system cleaner for 2- and 4-stroke engines.Possible to clean without removing components Overhead valve Hard-to-reach areas can be easily accessed Excellent cleaning performance Optimum carburettor performancePerfect throttle valve functionQuiet engine running Faults caused by dirty throttle valves or carburettors are rectified.Application areaRemoves deposits and impurities in the intake and throttle valve area. Calibrated drill holes and nozzles can also be cleaned with this process. Suitable for catalytic converters. InstructionsWhen the engine is turned off, generously spray all parts to be cleaned and allow the active agent to react for 2–3 minutes. Then, with the engine running for approx. 30 seconds, spray into the intake and throttle valve area, while slightly increasing the speed to loosen the deposits.

Würth

Suitable for all engines Removes corrosion and sludge deposits in the cooling circuit Increased operational reliability due to clean cooling system.Removes deposits in the cooling circuit and cleans the cooling system of contamination. For instance, oil residues caused by damage to the cylinder heads can be removed. The radiator cleaner can also be used as a preventative measure every time the coolant is changed. 250 ml is sufficient for 10 litres of cooling water. 1000 ml is sufficient for 40 litres of cooling water.Application areaFor rectifying reduced cooling performance during radiator repairs and maintenance work on the cooling system. InstructionsAdd the contents of the can to the cooling water. Open the heater valves. Run the engine at operating temperature for approx. 30 minutes. Deposits that have been dislodged by the radiator cleaner must be flushed away with water. The flushing process can be carried out without removing the thermostat. It is recommended that parts that have been affected by oil ingress, such as the expansion tank and water hoses, be replaced. Refill the cooling system after cleaning, bleed and check for leaks.

Würth

CLNR-PARTICLFILT-400ML

Würth

GEARBOXADD-TRANSMISS-TREAT-MANUAL-125ML

Würth

INJCLNR-PETROL-150ML

Würth

Special cleaner for cleaning the injection system Cleaning action Removes resinous and paint-like deposits in the micro range on injection valves and on the fuel distributorEnsures precise controlling of injection valvesLess fuel is used thanks to precise fuel injection Binds and neutralises acidic condensation waterProtects against corrosion This product is subject to the provisions of the German Chemicals Prohibition Ordinance. Detailed information on the hazards arising from this product, the precautionary steps to be taken during proper use, dealing with spillages or other exposure and ensuring correct disposal can be found in the safety data sheet.Application areaFor all carburettor and petrol injection engines with and without a catalytic converter. Can also be used as a preventative measure after every service. Instructions150 ml are sufficient for 25–30 litres and 300 ml for 50–60 litres of fuel. Empty the contents of the can into the fuel tank.Contents300 mlColourColourlessSmell/fragranceSolvent-likeChemical basisNaphthaShelf life from production24 MonthDensity0.8 g/cm³Density conditionsat 20°CMin. flashing point30 °C

Würth

RADCLNR-1000ML

Würth

RADSEAL-300ML

Würth

RADSEAL-HP-150ML

Würth

For all carburettors and petrol injection engines Cleans injection valves, the combustion chamber and the intake area Reduces increased fuel consumptionImproves engine running and response Protects against valve burning by having clean and tight valve seats A high level of cleaning is achieved in intake valves, in the combustion chamber and intake area thanks to the washing-active, fuel-compatible active agents in a cleaning solvent. Notice Spray hose not included in scope of delivery. Instructions Clamp off the vacuum hose at a suitable point and insert the spray probe. Spray half of the can contents evenly into all intake ducts while moving the probe back and forth, with the engine at operating temperature and approx. 2000 rpm. Turn the engine off and leave the product to take effect for approx. 30 minutes. Start the engine and drain the rest of the product. Dosage: 1 can for a 4-cylinder engine, 2 cans for engines with 6 cylinders or more. Contents300 mlColourColourlessSmell/fragranceSolvent-likeChemical basisHydrocarbonShelf life from production24 MonthDensity0.814 g/cm³Density conditionsat 20°CMin. flashing point30 °C

Würth

SYSCLNR-VEH-DISL-SYS-CLEA-400ML

Würth

SYSCLNR-VEH-INJ-CLEA-DIESEL-1000ML

Würth

SYSCLNR-VEH-INJCLNR-DISL-150ML

Würth

SYSCLNR-VEH-INJCLNR-DISL-300ML

Würth

ADD-DSPSYS-LPG-1000ML

Würth

For boosting the octane number in lower-grade fuels. Prevents wearImproves vehicle performanceClean combustionImproves octane numberReduces harmful exhaust gases Application area With lower-grade fuels, the octane number can be increased by 3–8 points (depending on the original fuel grade). Prevents wear on the valve seats. Protects against engine ringing, knocking and reignition. Instructions The octane booster is added straight into the tank. 300 ml are sufficient for 50–60 litres of fuel. Contents300 mlColourBrownSmell/fragranceSolvent-likeChemical basisHydrocarbonShelf life from production24 MonthDensity0.767 g/cm³Density conditionsat 20°CMin. flashing point-22 °C

Würth

GEARBOXADD-AUTO-TRANSM-TREATM-150ML

Würth

Rapid engine starting aid for cold starts which are gentle on the battery, with proven combination of active agents Helps with starting problems quickly and reliably, particularly in cold and damp weatherFor all 2-stroke and 4-stroke petrol and diesel engines, with and without catalytic converter Notice If the engine does not start after trying 2 or 3 times, check the engine's operational reliability! Contents300 mlColourTransparentSmell/fragranceCharacteristicChemical basisDiethyl etherShelf life from production24 MonthDensity0.659 g/cm³Density conditionsat 20°CSilicone-freeYesAOX-freeYes The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products

Würth

For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units.TCP reduces wear Longer compressor service lifeImproves the compressor service lifeReduces noises developing in the compressor(Tri-cresyl-phosphate) Additive specifically developed for vehicle air-conditioning compressors for reducing mechanical wear (friction) in the compressor (piston etc.)Compatible with PAG and ester oil NoticeNot suitable for sealing leaks on metallic components (evaporator, compressor, condenser etc.).Application areaConnect the A/C leakage stop additive to the adapter, insert into the application gun and mix in via the high-pressure side of the cooling system (engine must be switched off).Contents30 mlSmell/fragranceOdourlessChemical basisMethylene diphenylWater-solubleYesVapour pressure1.33 PaConditions for vapour pressureat 20°CColourLight yellow transparentMin. flashing point255 °CDensity1.02 g/cm³Viscosity/consistencyLiquidShelf life from production48 Month

Flamingo

Adopting professional formula, this product could help to start the engine quickly and stably without warming under atrocious weather (lower than -40℃ and moisture weather). It possesses the advantages of easy use, quick starting, harmless to the engine, no detonation and less consumption to automobile batteries and ignition switch. It is suitable for various gasoline and diesel engines in automobiles, trucks, motorboats and etc. USAGE DIRECTION: Remove the air filter, shake the can evenly. Aimed at the air intake, injection for 3 to 5 seconds. Do not spill, then start the engine.

Flamingo

High-performance detergents and friction modifiers come together to form a one-source solution to help: save gas by deep cleaning the entire fuel system; restore peak performance; reduce friction; prevent ethanol deposits; and inhibit corrosion. FLAMINGO FUEL INJECTOR CLEANER USED REGULARLY HELPS: √ Restore power and acceleration √ Smooth out rough idling √ Clean and condition fuel delivery system √ Increase fuel economy √ Reduce exhaust emission. DIRECTIONS: Add entire contents directly to a full tank of petrol. One bottle (250ml) will treat 50-60 liters. For best results use every 3000KM. Safe to use with other Flamingo additives.

Flamingo

High-performance detergents and friction modifiers come together to form a one-source solution to help: save diesel oil by deep cleaning the entire fuel system; restore peak performance; reduce friction; prevent ethanol deposits; and inhibit corrosion. FLAMINGO DIESEL FUEL SYSTEM DREDGE USED REGULARLY HELPS: √ Restore power and acceleration √ Smooth out rough idling √ Clean and condition fuel delivery system √ Increase fuel economy √ Reduce exhaust emission. DIRECTIONS: Add entire contents directly to a full tank of diesel oil One bottle (250ml) will treat 50-60 liters. For best results use every 3000KM. Safe to use with other Flamingo additives.

Flamingo

Flamingo Octane Booster is designed to increase the octane rating in petrol and clean the combustion chamber to allow vehicles to perform at their optimum level. Designed for petrol engines, this power booster is suitable for vehicles fitted with catalytic converters, super chargers and turbos, but it must not be used in a two-stroke engine. FLAMINGO OCTANE BOOSTER USED REGULARLY HELPS: • Increases the octane rating • Improves combustion • Optimizes engine performance • Enhances acceleration • Cleans the fuel system • Cleans intake ports • Compatible with all gasoline grades DIRECTIONS: Add entire contents directly to a full tank of gas One bottle (250ml) will treat 50-60 liters. For best results use every 3000KM. Safe to use with other Flamingo additives.

Flamingo

Remove all kinds of colloid, carbon deposit and other sediment in the engine effectively, guarantee good lubrication, reduce frictional resistance, restore and improve automotive power. Adopts refined oil as solvent, with special natural and detergent dispersant, restore elasticity of all gasket, rubber gasket inside the engine, enhance the sealing performance, reduce fuel consumption and engine wear, prolong the service life of oil and engine. USAGE DIRECTIONS: 1. Start the vehicle and wait until the engine goes to normal temperature. 2. Turn off the engine and add this product into the crankcase. 3. Run the engine at idle speed for 5-10 minutes to drain the previous engine oil. 4. Replace the filter and add the new engine oil.

Flamingo

Contains the most latest advanced engine additive, includes super additive, persistent lubricant and anti corrosion etc. It can improve the lubricating oil viscosity coefficient, effectively prevent the direct inter-metal friction, reduce mechanical wear and tear and makes the engine achieve best protection. It also insure the lubricating oil stable ,anti-aging, attenuation, neutralize acidity and anti-rust, makes bearings, valves, piston rings, cylinder wall have good lubricity in any case. Its special lustration component can prevent sludge cohesion and clean engine to achieve smooth, reduce mechanical resistance then decrease the loss of fuel, reduce the cost the car using. USAGE DIRECTIONS: 1. Change engine oil and start the engine, let the engine reach normal temperature. 2. Shut down engine then this product will be added to the new engine oil replacement, idle engine no less than 15 minutes. 3. Add one can for 4-6 cylinder engine, 8-cylinder engines add more two cans.

Flamingo

High-performance detergents and friction modifiers come together to form a one-source solution to help: save gas by deep cleaning the entire fuel system; restore peak performance; reduce friction; prevent ethanol deposits; and inhibit corrosion. FLAMINGO FUEL INJECTOR CLEANER USED REGULARLY HELPS: √ Restore power and acceleration √ Smooth out rough idling √ Clean and condition fuel delivery system √ Increase fuel economy √ Reduce exhaust emission. DIRECTIONS: Add entire contents directly to a full tank of petrol. One bottle (354ml) will treat 60-80 liters. For best results use every 3000KM. Safe to use with other Flamingo additives.

Flamingo

High-performance detergents and friction modifiers come together to form a one-source solution to help: save diesel oil by deep cleaning the entire fuel system; restore peak performance; reduce friction; prevent ethanol deposits; and inhibit corrosion. FLAMINGO DIESEL FUEL SYSTEM DREDGE USED REGULARLY HELPS: √ Restore power and acceleration √ Smooth out rough idling √ Clean and condition fuel delivery system √ Increase fuel economy √ Reduce exhaust emission. DIRECTIONS: Add entire contents directly to a full tank of diesel oil One bottle (354ml) will treat 60-80 liters. For best results use every 3000KM. Safe to use with other Flamingo additives.

Flamingo

Flamingo Octane Booster is designed to increase the octane rating in petrol and clean the combustion chamber to allow vehicles to perform at their optimum level. Designed for petrol engines, this power booster is suitable for vehicles fitted with catalytic converters, super chargers and turbos, but it must not be used in a two-stroke engine. FLAMINGO OCTANE BOOSTER USED REGULARLY HELPS: • Increases the octane rating • Improves combustion • Optimizes engine performance • Enhances acceleration • Cleans the fuel system • Cleans intake ports • Compatible with all gasoline grades DIRECTIONS: Add entire contents directly to a full tank of gas One bottle (354ml) will treat 60-80 liters. For best results use every 3000KM. Safe to use with other Flamingo additives.

Flamingo

Improves performance in oil burning engines. Helps Stop Exhaust Smoking and Crankcase Gases. Keeps Engines Running Longer and Better. Increases Oil Viscosity for Better Compression. Helps reduce exhaust smoke. Quiets noisy engines. Reduces oil blow-by Reduces oil burning and engine smoking FEATURES: Helps reduce exhaust smoke. Quiets noisy engines. Improves performance in oil burning engines.Helps Stop Exhaust Smoking and Crankcase Gases. Increases Oil Viscosity for Better Compression. Keeps Engines Running Longer and Better. Oil burning exhaust smoking and occurs when motor oil enters the combustion chamber and burns along with fuel. This condition, known as oil blow-by, occurs when friction and metal-to-metal contact have worn down parts and created gaps between the cylinder walls, piston rings, and valve guide seals. Flamingo Smoke Stop is specifically designed to reduce these problems. USAGE DIRECTIONS: Add 1 bottle to 4-5 quarts of oil at or between oil changes. Usage Frequency: Between every oil change.

Flamingo

High-performance detergents and friction modifiers come together to form a one-source solution to help: save gas by deep cleaning the entire fuel system; restore peak performance; reduce friction; prevent ethanol deposits; and inhibit corrosion.

Flamingo

Removes deposits on injection valves, on intake valves, spark plugs and in the combustion chamber and prevents new deposits forming. Cares for all parts of petrol injection system. Protects the whole fuel system from corrosion. Improves the gas acceptance and the compression. Optimises the exhaust gas values and the performance of the engine. Clean engines consume less fuel and emit fewer pollutants. DIRECTIONS : Add entire contents directly to a full tank of petrol. One bottle (300ml) will treat 60-80 liters. For best results use every 3000KM. Safe to use with other Flamingo additives.

Flamingo

High-performance detergents and friction modifiers come together to form a one-source solution to help: save petrol by deep cleaning the entire fuel system; restore peak performance; reduce friction; prevent ethanol deposits; and inhibit corrosion. USAGE DIRECTIONS : Add entire contents directly to a full tank of gas One bottle (300ml) will treat 60-80 liters. For best results use every 3000KM. Safe to use with other Flamingo additives.

Flamingo

FEATURE: Protects the catalytic converter from clogging with soot. Cleans the injection system and the combustion chamber. The combustion improver works directly, which leads to an immediate, measurable reduction of the pollutants. Clean engines use less fuel and emit less CO2. Prevents corrosion in the fuel system. Tested for turbochargers and catalytic converters. Suitable for all gasoline engines with a catalytic converter. Particularly as a preventative measure. 300 ml is sufficient for up to 70 liters of fuel. Effect remains for up to 2,000 km. DIRECTIONS: Add to the fuel as a preventative measure. 300 ml is sufficient for up to 70 liters of fuel. Can be added at any time because mixing takes place automatically. Effect remains for up to 2,000 km. •Guarantees optimum combustion •Guarantees low fuel consumption has a lasting effect •Cleans the mixture preparation system as well as the intake valves and the combustion chamber •Prevents corrosion in the fuel system •Tested for turbochargers and catalytic converters •Protects the catalytic converter from clogging with soot •Improves combustion •Immediate, measurable reduction of pollutants. CAUTION: 1.If swallowed by mistake, please contact physician for help immediately. 2.For eyes or skin contact, please rinse with water immediately. 3. This product is flammable, please storage at cool place and avoid direct sunlight. 4.KEEP OUT OF REACH OF CHILDREN

Flamingo

FLUSH 450ml

Flamingo

TREATMENT 450ML

Flamingo

STOP LEAK 354ML

Flamingo

STOP LEAK POWDER

Flamingo

CLEANER 354ML

Flamingo

BOOSTER 354ML

Flamingo

TREATMENT 354ML